1. Professional use only
The coatings, clearcoats, hardeners, activators, reducers, primers and powder coatings we sell are intended for trained professionals in commercial and industrial settings. They are not sold for household use.
2. Safety Data Sheets (SDS)
- As a distributor under the OSHA Hazard Communication Standard (29 CFR 1910.1200), Quamtex provides the manufacturer’s Safety Data Sheet for each hazardous product with your first shipment of that product, and again with the first shipment after the SDS is updated — sent by email with your order confirmation or packed with the order.
- You can also request any SDS at any time — where it is not yet attached to the Documents tab of the product page — by email to info@quamtex.com, by phone at +1 713-382-1945, or at our counter, where SDSs are always available.
- Keep the SDS where your employees can reach it, train them on the hazards, and keep the original container labels intact. Containers you transfer product into must be labeled as your hazard communication program requires.
3. Main hazards to know
- Flammability: most solvent-borne paints, reducers and clearcoats are flammable liquids. Keep them away from heat, sparks and open flames; store them in approved cabinets or areas; ground and bond containers when transferring.
- Isocyanates: many hardeners and activators for 2K (two-component) products contain isocyanates, which can cause allergic respiratory and skin sensitization. Spray only with adequate ventilation in a spray booth, and use the respiratory protection, gloves and eye protection specified in the SDS. Workers who are sensitized must not be exposed.
- Heavy metals and other substances: some pigments and coatings contain substances regulated by EPA and OSHA. Check section 2 and section 15 of each SDS.
- Powder coatings: fine powders can form combustible dust clouds; follow the SDS and your equipment manufacturer’s instructions.
4. Environmental rules for coating operations
Shops that spray-apply coatings are responsible for the environmental rules that apply to their operations — for example the EPA rule for paint stripping and miscellaneous surface coating at area sources (40 CFR Part 63, Subpart HHHHHH), which covers painter training, spray booths and high-efficiency spray guns, and, in the Houston-Galveston-Brazoria area, the Texas Commission on Environmental Quality VOC rules for surface coating (30 Texas Administrative Code Chapter 115). Mix and apply products exactly as the manufacturer’s instructions direct so they stay within their VOC limits, and dispose of waste paint, solvents and rags as hazardous waste where required.
5. Emergencies
In a chemical emergency call 911. The emergency phone number for each product is in section 1 of its SDS. For questions about using our products safely, call a coatings technician at +1 713-382-1945.
6. Product notices and recalls
If a manufacturer issues a safety notice or recall for a product you bought from us, we will contact the account using the contact information on file.
Questions about these terms: Quamtex, 2121 Brittmoore Rd Suite 100, Houston, TX 77043 · +1 713-382-1945 · info@quamtex.com